Laminating Machines

/Laminating Machines
Laminating Machines 2018-03-26T11:26:35+00:00

Neschen-Hotlam-1650-Double-H_600x400pxLaaco Laminates supply new laminating machines, direct from the best international manufactures. We can give you expert advice on what product best fit with your requirements.

We fulfil the needs of the exhibition market by supplying a high quality range of popular laminating machines, from industry leading brands.

Seal_laminators_600x400px

SEAL® Laminators

Professional laminating machines, for users who expect no less than the best high-performance.

Precision Engineered Wide Format Laminators. Choose from Cold, Top Heat Assist and Thermal.

All machines sold by Laaco, will do wide format mounting and lamination. If you are looking to do encapsulation you will need a more sophisticated machine with top and bottom heaters with pull rollers. These machines are normally more expensive and have a larger foot print, so care is needed to find the right machine to do the job and to fit your premises.

Power Supply

Most heated machines need at least a 13 amp power supply. Bigger machines and encapsulation machines often need 20-30 amp supply. Some of the older machines can use a 3 Phase supply. Laaco will ensure you have the right supply for your chosen machine.

Location of your Laminator

When purchasing your machine there are a number of factors that are needed to be taken into consideration. One key factor that will influence the purchase is the weight and footprint, especially if the machine needs to go upstairs or in basements. To reduce the weight of the machine select a machine with rollers which can be easily removed. Laaco will take everything into consideration and advise you accordingly.

Neschen

NESCHEN Laminators

Professional laminating machines, for users who expect no less than the best high-performance.

New in stock:

NESCHEN_EcoLam-1650_laminatorNESCHEN
ECOLAM 1650

Specially designed for mounting and laminating prints with a width of up to 1650mm.

All machines sold by Laaco, will do wide format mounting and lamination. If you are looking to do encapsulation you will need a more sophisticated machine with top and bottom heaters with pull rollers. These machines are normally more expensive and have a larger foot print, so care is needed to find the right machine to do the job and to fit your premises.

Power Supply

Most heated machines need at least a 13 amp power supply. Bigger machines and encapsulation machines often need 20-30 amp supply. Some of the older machines can use a 3 Phase supply. Laaco will ensure you have the right supply for your chosen machine.

Location of your Laminator

When purchasing your machine there are a number of factors that are needed to be taken into consideration. One key factor that will influence the purchase is the weight and footprint, especially if the machine needs to go upstairs or in basements. To reduce the weight of the machine select a machine with rollers which can be easily removed. Laaco will take everything into consideration and advise you accordingly.

Testimonials

We were in the middle of a large job requiring lamination when our machine broke down in the morning. An urgent SOS to Laaco, who had an engineer with us in the afternoon, and we were laminator again later in the day. Laaco saved the day.

Brian – Managing Director, Brimark Signs – Birkenhead

We needed a large laminator to fulfil a new production process that we had designed. We did lots of testing with Simon before buying a refurbished Seal 600. An excellent purchase.

Phil Maine – Senior Engineering, EPIGEM Redcar

Over the years our two seal laminators had been given a hammering and the rollers were badly cut. Simon explained that it would be much cheaper to replace the top rollers on both machines than to replace two £12,000 laminators. They were both done in one day with little or no down time to our busy production schedule.

Charlotte Thompson – Managing Director, Print Designs – Stafford

Simon is a goldmine of information on laminators and application. I have worked with him for many years.

Darren Marsh – Managing Director, OTW – Norwich

I bought a Seal 42 Plus from Simon. After a full day training with Laaco Laminates, I was turning out full size panels and making money.

Tim – Owner, Imoyeline Digital Print – Bournemouth

I have used Simon for many years for the repair and service of my laminators.

Simon Twigger – Owner, Lex Media – Portsmouth

When we got the order to apply strengthened laminate to the back of our new brick panels we contacted Simon and visited the Demo Room for testing. The Seal 600 Laminator rapidly coated the heavy brick panels for us.

Brian Ankers – Production Manager, Bathgate Slate – Stoke

We have used Simon for over 15 years to service and repair all our cutting and laminating machines. He always does what he says he’ll do and when he says he’ll do it. Happy to recommend him anytime.

N3 – Graphics – Bristol

I have now bought 2 laminators from Simon. His depth of knowledge and quality of stock is second to none. Very patient whilst I had to do all my tests.

Les Thompson – Managing Director, Sound Dampened Steel – Newcastle

The 2.0m wide OMMA Laminator I bought from Simon is probably the best bit of kit I have ever bought. We bought it for mounting but found it could slit and rewind as well. I have now bought 4 machines from Simon in 15 years.

Peter Nichols – Managing Director, JKN Digital – Preston

We are providers of leading brands

Speak to an expert, call 0161 285 9466 or send an enquiry:

Contact us